For one S9, one L3+, or one D3.
- The power cord is not included, please find one with at least 10 Amperes.
- If connected to a 110 V mains power supply, the APW3++ can deliver a maximum power of only 1200 W. To obtain the rated power of 1600 W, the APW3++ must be connected to a 220–240 V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
- This batch of PSUs comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
- Be sure to keep the original packing on hand when you get your PSU; the original box should be used to return the PSU when you requesting RMA. Otherwise, it won't be honoured.
APW3++ Specifications
|
Output
|
DC Voltage
|
12.15 V
|
|
Rated Current
(220 V input)
|
133 A
|
|
Rated Current
(110 V input)
|
100 A
|
|
Rated Power
(220 V input)
|
1600 W
|
|
Rated Power
(110V input)
|
1200 W
|
|
Ripple & Noise
|
<1%
|
|
Voltage Regulation
|
<2%
|
|
Source Regulation
|
<1%
|
|
Load Regulation
|
<1%
|
|
Setup, Rise Time
|
<2 s
|
|
Power off Protection Trip Time
|
>9 ms
|
| Interface Type |
5 pairs of 6-pin PCI-E connectors (i.e. 10 connectors) |
|
Noise Level
|
<43 dB
|
|
Input
|
Voltage Range
|
100–240 V AC
|
|
Starting Voltage
|
95–105 V AC
|
|
Frequency Range
|
47–63 Hz
|
|
Power Factor
|
>0.95 (full load)
|
|
Leakage Current
|
<1.5 mA (220 V, 50 Hz)
|
|
Protection
|
Low-voltage Input
|
80–89 V AC
|
|
Output Short Circuit
|
Yes
|
|
Output Overcurrent
|
134–185 A max.
|
|
Overheat Protection
|
Yes
|
|
Environment Conditions
|
Operating Temperature
|
-20°C–50°C
|
|
Operating Humidity
|
20%–90% relative humidity (non-condensing)
|
|
Structure
|
Dimensions
|
220mm*108mm*62mm
|
|
Cooling
|
Fan
|
Forced-air cooling
|
